-- *****************************************************************************
-- Juniper-FILE-XFER-MIB
--
-- Juniper Networks Enterprise MIB
-- File Transfer MIB
--
-- Copyright (c) 1999 Redstone Communications, Inc.
-- Copyright (c) 1999, 2001 Unisphere Networks, Inc.
-- Copyright (c) 2002 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************Juniper-FILE-XFER-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,TimeTicksFROM SNMPv2-SMI
RowStatus,DisplayStringFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
JuniName
FROM Juniper-TC
juniMibs
FROM Juniper-MIBs;juniFileXferMIB MODULE-IDENTITYLAST-UPDATED"200209162144Z"-- 16-Sep-02 05:44 PM EDT
ORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
E-mail: mib@Juniper.net"DESCRIPTION"The File Transfer MIB for Juniper Networks enterprise."-- Revision HistoryREVISION"200209162144Z"-- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0DESCRIPTION"Replaced Unisphere names with Juniper names."REVISION"200103281346Z"-- 28-Mar-01 08:46 AM EST - JUNOSe 3.0DESCRIPTION"Make it SMIv2 conformant."REVISION"200005010000Z"-- 1-May-00 - JUNOSe 2.0DESCRIPTION"Key revisions include:
o Obsoleted juniFileXferRemoteUserName.
o Obsoleted juniFileXferRemoteUserPassword.
o Added juniFileXferRouterName.
o Added juniFileXferCopyRunningCfgFailed(9) to juniFileXferStatus."REVISION"9908180000Z"-- 18-Aug-99 - JUNOSe 1.1DESCRIPTION"Initial version of this MIB module."::={ juniMibs 23}
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniFileXferObjects OBJECTIDENTIFIER::={ juniFileXferMIB 1}juniFileXferTable OBJECT-TYPESYNTAXSEQUENCEOF JuniFileXferTableEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of entries which describe file transfers."::={ juniFileXferObjects 1}juniFileXferTableEntry OBJECT-TYPESYNTAX JuniFileXferTableEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A description of a particular file transfer entry."INDEX{ juniFileXferIndex }::={ juniFileXferTable 1}
JuniFileXferTableEntry ::=SEQUENCE{
juniFileXferIndex INTEGER,
juniFileXferDirection INTEGER,
juniFileXferFileType INTEGER,
juniFileXferRemoteFileName DisplayString,
juniFileXferRemoteUserName DisplayString,
juniFileXferRemoteUserPassword OCTETSTRING,
juniFileXferLocalFileName DisplayString,
juniFileXferProtocol INTEGER,
juniFileXferStatus INTEGER,
juniFileXferRowStatus RowStatus,
juniFileXferTimeStamp TimeTicks,
juniFileXferRouterName JuniName }juniFileXferIndex OBJECT-TYPESYNTAXINTEGER(1..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A unique index used to identify this entry."::={ juniFileXferTableEntry 1}
juniFileXferDirection OBJECT-TYPESYNTAXINTEGER{juniFileXferLocalToRemote(1),juniFileXferRemoteToLocal(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the direction of the file transfer."DEFVAL{ juniFileXferRemoteToLocal }::={ juniFileXferTableEntry 2}juniFileXferFileType OBJECT-TYPESYNTAXINTEGER{juniFileXferSoftwareRelease(1),juniFileXferSystemConfig(2),juniFileXferRunningConfig(3),juniFileXferSystemLog(4),juniFileXferScript(5),
juniFileXferRebootHistory(6),juniFileXferBulkStatistics(7)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the file type of the file transfer."DEFVAL{ juniFileXferBulkStatistics }::={ juniFileXferTableEntry 3}juniFileXferRemoteFileName OBJECT-TYPESYNTAXDisplayString(SIZE(0..128))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The full path name of the source/destination file on the remote
system."DEFVAL{""}::={ juniFileXferTableEntry 4}juniFileXferRemoteUserName OBJECT-TYPESYNTAXDisplayString(SIZE(0..64))
MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION"The user name to use when requesting the file transfer to/from the
remote system.
This object has been obsoleted. Use the enterprise host mib in order to
configure the username."DEFVAL{"anonymous"}::={ juniFileXferTableEntry 5}juniFileXferRemoteUserPassword OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..64))MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION"The password to use when requesting the file transfer to/from the
remote system. When read, this object returns a zero string. Note
that, for security reasons, some FTP servers may insist on a non-zero
length user password.
This object has been obsoleted. Use the enterprise host MIB in order to
configure the password."
DEFVAL{"anonymous"}::={ juniFileXferTableEntry 6}juniFileXferLocalFileName OBJECT-TYPESYNTAXDisplayString(SIZE(0..128))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The local file name to transfer or to create as a result of an incoming
transfer."DEFVAL{""}::={ juniFileXferTableEntry 7}juniFileXferProtocol OBJECT-TYPESYNTAXINTEGER{juniFileXferFtp(1),juniFileXferTftp(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the file transfer protocol type."
DEFVAL{ juniFileXferFtp }::={ juniFileXferTableEntry 8}juniFileXferStatus OBJECT-TYPESYNTAXINTEGER{juniFileXferSuccessfulCompletion(1),juniFileXferInProgress(2),juniFileXferRemoteUnreachable(3),juniFileXferUserAuthFailed(4),juniFileXferFileNotFound(5),juniFileXferFileTooBig(6),juniFileXferFileIncompatible(7),juniFileXferPended(8),juniFileXferCopyRunningCfgFailed(9)}MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The status of the file transfer."::={ juniFileXferTableEntry 9}juniFileXferRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The row status object controls the creation/deletion of rows in this
table. Its semantics are the same as those for the RowStatus textual
convention specified for SNMPv2.
Setting this object to createAndGo(4) is allowed. If required objects
are missing, the agent will create the row and set its status to
notReady(3). If all of the required objects are present and valid, the
agent will create the row, set it to active and commence the file
transfer. Upon completion of the file transfer, the agent will set the
rowStatus to notInService(2), indicating that the row is valid and
useable by a management client. To commence another transfer, a
management client should set the rowStatus to active(1).
Setting this object to createAndWait(5) causes an entry to be created
with juniFileXferRowStatus value of notInService(2) if all of the
required objects are present and valid. Or, if some of the required
objects are missing or invalid, the agent will create the row and sets
its status to notReady(3).
Setting this object to active(1) causes the transfer to start for the
given row. Objects within the row cannot be modified once a row has
been set to active(1),
Setting this object to destroy(6) causes the corresponding row to be
deleted.
Note that only a single instance of a row can be active at at any given
moment, although several rows can exist in the table."::={ juniFileXferTableEntry 10}juniFileXferTimeStamp OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of sysUpTime at the last status change for this entry."::={ juniFileXferTableEntry 11}juniFileXferRouterName OBJECT-TYPESYNTAX JuniName
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The name of the router to be used when resolving the hostname portion
of the juniFileXferRemoteFileName object. If this object contains an
invalid or empty value, the default router will be used."::={ juniFileXferTableEntry 12}juniFileXferTrapEnabled OBJECT-TYPE
SYNTAXINTEGER{true(1),false(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An indication of whether the juniFileXferTrap trap is enabled."::={ juniFileXferObjects 2}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniFileXferNotifications OBJECTIDENTIFIER::={ juniFileXferMIB 2}juniFileXferNotifyPrefix OBJECTIDENTIFIER::={ juniFileXferNotifications 0}juniFileXferTrap NOTIFICATION-TYPEOBJECTS{
juniFileXferStatus,
juniFileXferTimeStamp }STATUScurrent
DESCRIPTION"An indication that the status associated with a particular file
transfer entry has changed."::={ juniFileXferNotifyPrefix 1}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniFileXferConformance OBJECTIDENTIFIER::={ juniFileXferMIB 4}juniFileXferCompliances OBJECTIDENTIFIER::={ juniFileXferConformance 1}juniFileXferGroups OBJECTIDENTIFIER::={ juniFileXferConformance 2}--
-- compliance statements
--juniFileXferCompliance1 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities that implement the Juniper
file transfer MIB. This compliance statement became obsolete when
remote user information was removed and router name was added."MODULE-- this moduleMANDATORY-GROUPS{
juniFileXferGroup1,
juniFileXferTrapGroup }::={ juniFileXferCompliances 2}-- JUNOSe 1.1juniFileXferCompliance2 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities that implement the Juniper file
transfer MIB."MODULE-- this moduleMANDATORY-GROUPS{
juniFileXferGroup2,
juniFileXferTrapGroup }::={ juniFileXferCompliances 3}-- JUNOSe 2.0--
-- units of conformance
--juniFileXferGroup1 OBJECT-GROUPOBJECTS{
juniFileXferIndex,
juniFileXferDirection,
juniFileXferFileType,
juniFileXferRemoteFileName,
juniFileXferRemoteUserName,
juniFileXferRemoteUserPassword,
juniFileXferLocalFileName,
juniFileXferProtocol,
juniFileXferStatus,
juniFileXferRowStatus,
juniFileXferTimeStamp,
juniFileXferTrapEnabled }STATUSobsoleteDESCRIPTION"Obsolete collection of objects providing management of file transfers
in a Juniper product. This group became obsolete when remote user
information was removed and juniFileXferRouterName was added."::={ juniFileXferGroups 2}juniFileXferGroup2 OBJECT-GROUPOBJECTS{
juniFileXferIndex,
juniFileXferDirection,
juniFileXferFileType,
juniFileXferRemoteFileName,
juniFileXferLocalFileName,
juniFileXferProtocol,
juniFileXferStatus,
juniFileXferRowStatus,
juniFileXferTimeStamp,
juniFileXferRouterName,
juniFileXferTrapEnabled }STATUScurrentDESCRIPTION"A collection of objects providing management of file transfers in a
Juniper product."::={ juniFileXferGroups 3}
juniFileXferTrapGroup NOTIFICATION-GROUPNOTIFICATIONS{
juniFileXferTrap }STATUScurrentDESCRIPTION"A management notification pertaining to file transfers."::={ juniFileXferGroups 4}END